PARALLEL LATHE FOLLOW CE360X1000
Ref.: CE360X1000 FOLLOW
| Main spindle hole | 38 |
| Spindle nose | CAMLOCK Nº4 |
| Dimensions (length x width x height) | 1900x740x1170 |
Technical specs
| Characteristics | ||
| Height of points | 180 | |
|---|---|---|
| Distance between centers | mm | 1000 |
| Swing over bed | mm | 356 |
| Swing over ram | mm | 506 |
| Swing over carriage | mm | 210 |
| Bed width | mm | 225 |
| Length gap | mm | 210 |
| width charriot | mm | 80 |
| Main spindle hole | mm | 38 |
| Number of speed ranges of spindle | 12(40-1800) r.p.m | |
| Spindle nose | CAMLOCK Nº4 | |
| Main spindle morse taper | MT5 | |
| Longitudinal feed | mm/min | 0.030-0.688 |
| Cross feed | mm/min | 0,0015-0.220 |
| Metric pitch | (22) 0,45-7.5 mm | |
| Pasos Whitworth | (33) 72-4,3/4 | |
| Modular pitch | (12) 0,25-3,5 | |
| Diametral pitch | (4) 8T.P.I. | |
| Master spindle pitch | Ø 25 X 4 DP | |
| Cross carriage travel | mm | 200 |
| Carriage travel | mm | 95 |
| Max. dimension of tool | mm | 16x16 |
| Tailstock morse taper | 3 CM/MT | |
| Power of the main motor | kw | 3/4 |
| Power of motor pump | Kw | 0,04/0.055 |
| Electrical voltage | V | 230-400/50-60Hz |
| Dimensions (length x width x height) | mm | 1900x740x1170 |
| Net weight | Kg | 1250 |
| Quill diameter | mm | 45 |
| Quill travel | mm | 120 |
Standard configuration
- FAGOR DRO X,Z
- 3 jaw self-centering chuck 160 mm
- 4 independient jaw chuck 200 mm
- Faceplate chuck
- Automatic Norton box (without gear change)
- Steady rest
- Follow rest
- Rotating Point
- Fixed Point
- Quick-change tool post with 4 tool holders
- Monoblock cast bed
- Emergency brake
- Coolant system
- Working lamp
- CE-Certified